NYC Airport Codes: Every New York Airport Explained

New York State has more airports than most travelers realize, and the NYC airport codes are easy to mix up. The state operates dozens of FAA-recognized facilities, from large hub international gateways serving tens of millions of passengers annually to small regional fields tucked into the Southern Tier. Knowing the correct IATA airport code helps when you book a flight, read an itinerary or check a baggage tag. This guide covers every major New York airport code, organized by region, with passenger data and FAA classification for each facility. It runs from JFK and LaGuardia in the New York City metro to Buffalo Niagara, Syracuse Hancock and Rochester.

What Do Airport Codes Mean — IATA, ICAO, and FAA Explained

Three separate coding systems label every airport in the United States, and each system serves a distinct purpose.

IATA airport codes are the 3-letter identifiers passengers see on boarding passes, booking sites, and airline departure boards. The International Air Transport Association assigns these codes globally to commercial airports.

ICAO location indicators are 4-letter codes used by air traffic control, flight planning systems, and pilots filing flight plans. The International Civil Aviation Organization administers this system worldwide.

FAA location identifiers are domestic codes assigned by the Federal Aviation Administration for regulatory filings, general aviation records, and the National Plan of Integrated Airport Systems (NPIAS) database.

The three systems overlap but are not interchangeable. JFK is the IATA code for John F. Kennedy International Airport. Its ICAO equivalent is KJFK, and its FAA identifier matches the IATA code. Smaller general aviation fields often carry FAA identifiers with no IATA code at all, because scheduled passenger service never operates there.

Understanding which system applies prevents confusion when comparing airport information across airline booking platforms, FAA regulatory documents, and air traffic control records.

Major NYC-Area Airport Codes (Large and Medium Hubs)

The three major NYC-area airports serve as the primary gateways to the greater New York metropolitan region. Most travelers use "NYC airports" to refer to all three collectively, even though one sits across state lines in New Jersey. All three major NYC-area airports have been operated by the Port Authority of New York and New Jersey since 1947, one authority across two states. Aviation in the New York metropolitan area

Collectively, the three major New York metro airports handled more than 145 million passengers in 2024, making the New York metropolitan area the busiest airport system in the United States and the second-busiest in the world after London. Aviation in the New York metropolitan area Beyond raw passenger volume, the New York metro airport system ranks as the country's most frequently used port of entry and departure for international flights. Aviation in the New York metropolitan area

Until 2022, all three New York metro airports shared the collective IATA code NYC, a multi-airport city code used by some booking systems. Newark Liberty has since been removed from that grouping and now operates exclusively under EWR. Aviation in the New York metropolitan area

John F. Kennedy International Airport — JFK

JFK is New York's largest large hub airport, located in Queens and handling approximately 62.5 million passengers per year according to FAA NPIAS data. Delta, American, and JetBlue anchor operations there, alongside dozens of international carriers. Ground transfers from Manhattan can take over an hour at peak times. BLADE helicopter transfers are a faster way to all three major hubs.

LaGuardia Airport — LGA

LGA serves as the primary Manhattan-facing gateway, situated in Queens just five miles from Midtown. Annual passenger traffic is about 33 million. The airport focuses on domestic scheduled passenger service, making it the preferred choice for East Coast corridor routes. Travelers weighing options across all three metro airports can find a detailed breakdown in this JFK, LGA, and EWR comparison.

Newark Liberty International Airport — EWR

EWR functions as a full NYC hub despite its New Jersey location. United Airlines operates its major East Coast hub there, and annual passengers approach 46 million. Travel time from downtown Manhattan runs comparable to JFK, and EWR consistently ranks among the busiest commercial service airports in the country.

Despite FAA-imposed hourly flight limits designed to manage the extremely congested Class B airspace shared by all three airports, JFK, LGA, and EWR consistently rank among the top five airports in the United States for flight delays. Aviation in the New York metropolitan area

Upstate New York Airport Codes (Regional and Small Hubs)

Upstate New York airport codes serve travelers across four major cities, each operating under FAA and IATA designations assigned through the National Plan of Integrated Airport Systems (NPIAS).

Buffalo Niagara International (BUF) is the largest upstate airport, processing approximately 5 million annual passengers. Its location near Toronto and Niagara Falls drives cross-border demand, earning its medium hub classification under NPIAS criteria. Albany International (ALB), Greater Rochester International (ROC), and Syracuse Hancock International (SYR) each record approximately 1.5 million annual enplanements, placing all three in the FAA small hub category. American Airlines and Delta operate scheduled passenger service at each of these upstate airports, connecting New York State's interior cities to major national hubs year-round.

Smaller New York Airport Codes Worth Knowing

New York State's smaller commercial service airports round out the state's air network with scheduled passenger service at regional and general aviation facilities across multiple counties.

Stewart International Airport (SWF), located in Orange County's Hudson Valley, serves as a lower-cost alternative for Greater New York travelers, alongside Long Island MacArthur Airport (ISP) in Suffolk County. Westchester County Airport (HPN) in White Plains offers scheduled service close to Manhattan's northern suburbs. Elmira/Corning Regional (ELM) and Greater Binghamton Airport (BGM) — Edwin A. Link Field — anchor the Southern Tier. Ithaca Tompkins Regional (ITH) serves Tompkins County, while Niagara Falls International (IAG) provides cross-border access near the Canadian frontier. Plattsburgh International (PBG), Watertown International (ART) and Ogdensburg International (OGS) hold FAA NPIAS designations but operate mainly as general aviation facilities with limited or no scheduled passenger service, which is worth checking when planning flights to New York.

How Are New York Airports Classified by the FAA?

The FAA classifies airports in the National Plan of Integrated Airport Systems (NPIAS) by annual passenger enplanements — counted boardings, not round trips. Large hubs handle at least 1% of total U.S. enplanements, medium hubs between 0.25% and 1%, and small hubs between 0.05% and 0.25%. Airports below that threshold with scheduled service are non-hub primaries. Facilities without commercial airline service are classified as general aviation airports and typically host only charter or private FBO operations. Travelers seeking flexible access to these airports may also consider airport transfer flights as a time-saving alternative to ground transport.

Quick-Reference Table: All New York State Commercial Airport Codes

The major commercial airports serving New York State appear in the master reference table below. Use the IATA code column when searching schedules on airline booking sites or FlightAware — enter the three-letter code directly into the search field to pull up all available flights for that airport.

All IATA codes listed reflect official assignments recognized by the International Air Transport Association. FAA location identifiers match those published in the National Plan of Integrated Airport Systems (NPIAS). Manhattan has no scheduled commercial airline service, so JFK, LGA and EWR are the main airports for travelers flying into the city.

The Takeaway: NYC Airport Codes and What They Mean for Your Travel Plans

New York State has one of the most complex airport networks in the United States. Knowing the codes helps you avoid booking errors and pick the airport that serves your destination.

JFK, LGA, and EWR anchor the system as large hub airports serving tens of millions of passengers each year. Beyond those three, New York State's NPIAS-designated commercial service airports — including BUF in Buffalo, SYR at Syracuse Hancock International, ROC at Greater Rochester International, and BGM at Greater Binghamton Edwin A. Link Field — connect smaller cities to national and international routes. SWF at New York Stewart International and ISP at Long Island MacArthur round out the downstate options.

Each IATA airport code and FAA location identifier is an official designation tied to a specific facility. Check both codes when booking, especially for airports in the same metro area.